Easy methods to Manufacturing facility Reset a DJI Drone & Controller (Step-by-Step Information) – Droneblog.com

0
14


How to Factory Reset a DJI Drone & Controller (Step-by-Step Guide)

Whether or not you want to promote your drone, give it to a good friend or member of the family, or maybe attempt to right points and errors which have occurred when nothing else has labored, you would possibly need to reset your drone or controller and get it again to a pristine manufacturing unit state.

Nonetheless, not like the on a regular basis digital gadgets we supply frequently (cell telephones, tablets, laptops), it’s barely extra concerned in resetting a DJI drone again to manufacturing unit settings, than, say, going right into a display screen within the drone’s flight app and urgent a button.

You are able to do a manufacturing unit reset of some of the favored fashions of DJI drones utilizing the DJI Assistant 2 software program. Lots of the newer DJI drone fashions can’t be reset to manufacturing unit settings, however you’ll be able to take away your private data from them previous to promoting, or you’ll be able to downgrade the firmware to repair bugs.

Under is a step-by-step walk-through on the right way to manufacturing unit reset your DJI drone, if the choice is obtainable.

Notice: Many of the newer DJI drones can’t be manufacturing unit reset or restored, nevertheless, there are some steps that may be taken to “clear them up”.  Extra on this under.

Fashions that can be manufacturing unit reset/restored embody:

  • Encourage 2
  • Phantom Line
  • Mavic Professional (2016)
  • Mavic Air (2018)
  • Spark

Fashions that can’t be manufacturing unit reset/restored embody:

  • Mavic Mini 
  • Mini SE
  • Mini 2
  • Mavic Air 2 and Air 2S
  • Mavic 2 Professional/Zoom & Enterprise
  • Mavic 3

Manufacturing facility reset utilizing DJI Assistant 2 software program 

To this point, the next older drones – the Encourage 2, Phantom 3 & 4, Mavic Professional (2016), Mavic Air (2018), and Spark can be restored again to Manufacturing facility Settings.  

Under are the steps to do a manufacturing unit reset utilizing the DJI Assistant 2 software program.

Step 1

With a view to begin the manufacturing unit reset course of, you’ll want:

  1. The appropriate On the Go (OTG) USB cable that got here together with your drone (or buy one on-line) and 
  2. Be at your laptop and obtain the DJI Assistant 2 software program in your drone.  

Relying in your drone, go to DJI.com, do a seek for your drone mannequin utilizing the magnifying glass on the high of the positioning, which is able to immediate you to “Search DJI.com…”  Kind in your drone.

Step 2

Upon getting positioned your drone mannequin, go into its designated web page and click on on downloads.  This can carry you to your drone’s downloads space.  Scroll down and you will note the DJI Assistant 2 software program.

Notice: In case your drone has a lacking downloads web page, it is best to have the ability to use any one of many different drone pages DJI Assistant 2 downloads.

Select the proper obtain in your working system (Mac or Home windows) and run the pkg or exe.

Step 3

After the software program installs, go into the DJI Assistant 2 software program.  You’ll be prompted to attach your drone to the Assistant 2 software program.  

Plug the OTG cable into your PC/Mac first, plug the opposite finish into your drone, after which lastly flip your drone on. 

The software program will take just a few seconds to “suppose” because it locates your machine, then you definately’ll be introduced into one other display screen that may present your related gadgets or drone, on this case.

Step 4

Click on as soon as in your drone title and the software program will carry you to a fundamental menu display screen with the next choices on the left-hand facet:

  • Firmware Replace
  • Knowledge Add
  • Flight Knowledge
  • Calibration
  • Simulator
  • WiFi Settings

You’ll initially be within the Firmware Replace part, which is precisely the place you need to be.  After the web page totally hundreds, you’ll see an inventory of your put in Firmware and an inventory of earlier firmware variations.  Right here it is possible for you to to downgrade your firmware if there may be certainly a earlier model accessible.  

For our intents and functions, press Restore Manufacturing facility Defaults.  The method will run, exhibiting you a progress bar in percentages and that’s it.  Your drone is now restored again to manufacturing unit settings.

Notice: If you’re desirous to downgrade your firmware, you are able to do so and additionally join your distant management individually, utilizing STEP 3, then following the continuing steps.

Newer DJI drones (no manufacturing unit reset)

As of this text’s writing, it has been confirmed by DJI Help that presently there may be no option to manufacturing unit reset many of the widespread newer Mavic line (Mini, Mini 2, Mini SE, Mavic Air 2, Air 2S, Mavic 2 Professional, Mavic 2 Zoom, Mavic Enterprise and Mavic 3).  That’s right.  No manner to take action.  However don’t get discouraged.

If you’re planning on promoting your newer Mavic, and also you’d like your data eliminated, per DJI Help, your solely possibility is to signal out of your DJI Account within the DJI Fly app (in your cellular machine(s) used to manage the drone).  This can promptly take away your private data and flight information, as this data is related to the consumer account and never the drone.

Should you had been desirous to manufacturing unit reset attributable to errors and points, you can roll again your firmware model (for the Drone and the Distant Management) by following the steps above for the DJI Assistant 2.  

To downgrade your firmware model, comply with all of the aforementioned steps, and, for STEP 4, as an alternative of doing a Restore Manufacturing facility Defaults, from the Firmware part, merely downgrade your firmware, then repeat the method with the distant management plugged in.

Easy methods to manufacturing unit reset the DJI Good Controller

Fortunately DJI has included a option to simply manufacturing unit reset your DJI Good Controller.  This is sensible, as it’s mainly a wifi-enabled sensible machine and distant controller multi functional.  So, like many smartphones, you’ll be able to simply go in and, after just a few easy steps, reset the controller.

That is completed in two separate phases: deleting the controller’s cache and account, adopted by restoring manufacturing unit settings.

Stage 1

  1. Energy on the controller. 
  2. Launch the DJI GO 4 app (not the DJI Fly App).  
  3. Within the DJI GO 4 app, find the button title “ME”.  
  4. Urgent this may carry you to your data display screen.  
  5. Press the gear icon within the higher right-hand nook after which “clear cache”. 
  6. SIGN OUT after the cache has cleared.  
  7. On to the subsequent stage.

Stage 2

  1. Double-click the bodily Again/Operate button on the higher left of the sensible controller, which is able to carry you to the principle display screen.  
  2. Right here, click on on SETTINGS.  
  3. Scroll right down to after which select Manufacturing facility Knowledge Reset.
  4. Verify the reset.  

After this, the controller will erase all data, return to a manufacturing unit state, and reboot, leaving you with a DJI manufacturing unit unit.

LEAVE A REPLY

Please enter your comment!
Please enter your name here